Organic waste gas treatment equipment pry mounted condensing membrane separation unit, suitable for the chemical, pharmaceutical and printing industries

organicWaste gas treatment equipmentSkid-mounted condensing membrane separation unit, suitable for chemical and pharmaceutical printing industry

Skid-mounted condensing membrane separation unit is a kind of VOCs that integrates compression condensation and membrane separation technology.waste gas treatmentDevice. The equipment takes physical separation as the core, and is suitable for the treatment of medium and high concentration organic waste gas in chemical, pharmaceutical, printing and other industries. The equipment adopts skid-mounted design. The compressor, condenser, membrane module and control system are all integrated on the steel base. The assembly and debugging are completed before leaving the factory. The site can be put into operation only by connecting the power supply and gas circuit. The installation period is short and the floor area is small.

The equipment employs a combined process of compression-condensation and membrane separation. The exhaust gas is first pressurized by the compressor to increase the partial pressure of organic matter and create conditions for subsequent condensation. The pressurized gas enters the multi-stage condensation unit, and most of the organic matter is changed from gaseous to liquid by graded cooling. The liquefied solvent is separated by the collection tank and can be directly recycled for production. The condensed tail gas still contains a small amount of organic matter that has not been liquefied, and this part of the gas enters the membrane separation unit.gas separation membraneBy leveraging the difference in permeation rates between organic molecules and air molecules through the membrane material, organic compounds preferentially pass through the membrane to form a concentrated gas stream, which is then returned to the compressor inlet, mixed with fresh waste gas, and reintroduced into the condensation process; the retained air is discharged after meeting emission standards. The whole system forms a closed cycle, and the recovery rate of common solvents can reach more than 95%.

The equipment is driven by electricity, does not consume natural gas, and is not in operation.activated charcoalWait for consumables to be replaced; no hazardous waste is generated. The process is normal temperature to low temperature operation, does not involve combustion, no open flame, and has good applicability in chemical, pharmaceutical and other explosion-proof places. Equipped with a PLC-based fully automatic control system, it can automatically start and stop based on the generation of exhaust gases, eliminating the need for dedicated personnel on duty.

The equipment is suitable for the chemical industry reaction kettle waste gas, distillation tail gas, the pharmaceutical industry solvent waste gas, printing and packaging industry ethyl acetate waste gas and other high concentration solvent recovery scenarios. Prior to equipment selection, a flue gas condition assessment should be conducted to obtain key parameters such as concentration, composition, and flow rate. LuoyangWohong PetrochemicalEquipment Co., Ltd. focuses on the field of VOCs membrane recovery, and can provide design and manufacturing services for skid-mounted condensing membrane separation units according to customer working condition parameters.