How much space is required for the installation of VOC waste gas treatment equipment?

    VOCWaste gas treatment equipmentHow much space is required for installation?

    VOCwaste gas treatmentThe footprint of the equipment varies depending on the type of process and processing scale, ranging from a few square meters to hundreds of square meters.

Skid mounted small equipment is a suitable choice when the site is limited. Taking the compression condensation membrane separation unit with a processing capacity of 100 cubic meters per hour as an example, the minimum equipment size can reach 5.0 meters by 2.5 meters, occupying an area of approximately 12.5 square meters. Smaller units can occupy an area of less than 10 square meters. This type of equipment is assembled and debugged before leaving the factory, and can be operated on site by simply connecting the power supply and gas circuit. There is no need to build a separate equipment foundation, and the installation cycle is short.

    RTOThe land occupation of thermal storage combustion equipment is relatively large. Taking the three bed RTO for treating waste gas from container production lines as an example, the equipment body covers an area of about 20 meters by 5 meters, which is 100 square meters. If the chimney foundation, maintenance platform, control room and other ancillary facilities are added, the actual land occupation will be larger. RTO equipment also needs to reserve a safe distance, which should not be less than 9 meters away from surrounding factories.

    activated charcoalThe main body of the adsorption equipment does not occupy a large area, but it requires reserved operating space for replacing the carbon box and hazardous waste storage area. The actual occupied area is usually larger than the size of the main body.

When planning a site for an enterprise, it is recommended to first determine the process route and processing air volume, and then reserve sufficient installation and operation space based on equipment size, including maintenance channels and equipment lifting conditions. LuoyangWohong PetrochemicalEquipment Co., Ltd. can provide customized size solutions for pry mounted compression condensing membrane separation units based on on-site conditions.