The starting idea for selecting oil and gas recovery equipment: how to estimate the amount of oil and gas generated, how to leave a margin for the processing capacity, how to combine membrane separation and condensation, how to select dismantling and separation, and the list that needs to be confirmed with the manufacturer before selection.
2026-10-27The operation coordination of membrane separation oil and gas recovery device: how to stabilize the inlet concentration in the absorption section, how the membrane separation section works by pressure difference, how to connect the condensate in the condensation section, and the parameters to be monitored during daily inspections.
2026-10-27Key points for the landing of oil and gas recovery in the unloading process: sealing inspection of the oil and gas recovery quick connector, confirmation of the direction of the return gas path, operation sequence before and after unloading, and on-site handling of common abnormalities.
2026-10-27The three key points for the acceptance of oil and gas recovery pipelines are slope review method, pressure and holding judgment of airtight testing, and standard requirements for identification and labeling. Both the construction party and the station party can follow the instructions.
2026-10-27Daily observation points for membrane component maintenance: determination of the trend of vacuum degree and flow rate on the permeation side, pressure changes on the interception side, and pressure difference before and after the membrane, and incorporating membrane life management into daily inspections.
2026-10-27The filling method of the oil and gas recovery inspection form: daily mandatory inspection items, how to arrange weekly and monthly items, how to interpret abnormal readings, making the inspection form a real tool for problem discovery.
2026-10-27Dimethyl carbonate has a boiling point of about 90 ℃, significant volatilization at room temperature, and is slightly soluble in water. The condensate can be allowed to settle and separate into layers, making it a green solvent with high recovery value. This article summarizes the key points of exhaust gas sources, closed collection, two-stage condensation, and water containing condensate treatment, for reference by relevant enterprises.
2026-10-23The condensed liquid recovered from condensation is sent from the recovery point to the reuse or disposal point, and the storage and transportation links in between determine the loss and quality. This article explains the configuration requirements, quality storage division, transportation method selection, and key points of ledger measurement for condensate tanks, providing reference for design and management.
2026-10-23Dimethylacetamide has a boiling point of about 165 ℃ and is miscible with water. It is widely used in spinning, medicine, and resin fields, with limited volatilization at room temperature and concentrated emissions in high-temperature processes. This article summarizes the characteristics of its exhaust gas, closed collection, two-stage condensation, and the key points of condensate refining and reuse, for reference by relevant enterprises.
2026-10-23For the decline of membrane flux, four reasons are distinguished: concentration polarization, gel layer, membrane pore blockage and membrane compaction. The first three are reversible and the fourth are irreversible. This paper gives identification and disposal.
2026-10-22Mr. Li 13526990215
Hotline
