Compression condensation membrane separation, skid-mounted design and quick installation

The compressed condensation membrane separation unit features a skid-mounted design, integrating the compressor, condenser, membrane module, and control system onto a steel base; assembly and commissioning are completed prior to shipment. After the equipment arrives at the site, it can be operated only by connecting the power supply and gas circuit. The installation period is calculated in days, and the operation can be completed within two days.

The skid-mounted design simultaneously addresses the space requirement. Taking a unit with a processing air volume of 100 cubic meters per hour as an example, the minimum size of the equipment can be 5.0 meters by 2.5 meters, covering an area of about 12.5 square meters, and the area of a smaller unit can be controlled within 10 square meters. The equipment can be placed in the open air without the need to build an equipment plant, which is particularly suitable for renovation projects with limited space. If relocation is required in the later period, the whole hoisting can be done to avoid the asset precipitation of fixed equipment.

The equipment adopts the combined process of "compression condensation membrane separation", with pure physical separation as the core, does not involve combustion, no open flame, and has good applicability in explosion-proof places such as chemical, pharmaceutical, and storage tank areas. system driven by electricity, noactivated charcoalThe daily maintenance is mainly to clean up the heat exchanger and check the pressure difference of the membrane module. Equipped with a PLC-based fully automatic control system, it automatically starts and stops based on the generation of exhaust gases, eliminating the need for dedicated personnel on duty.

Before selecting equipment, it is recommended to first conduct a process condition assessment and match the equipment specifications based on concentration, composition, and airflow rate. LuoyangWohong PetrochemicalEquipment Co., Ltd. provides design and manufacturing services for skid-mounted condensing membrane separation equipment, which can be customized in size and configuration according to customer site conditions.