High concentration exhaust gas is not a problem

High concentration of waste gas is not a problem, but can make money by choosing the right process.

Many enterprises hear the high concentration of exhaust gas, the first reaction is difficult to deal with, high equipment requirements. In fact, high concentration of waste gas is not a problem, the key is to choose the right process.

    activated charcoalAfraid of high concentration, because the carbon saturation is fast, the carbon exchange frequency is high, and the operating cost rises linearly.RTOIt can handle high concentration, but the gas cost is higher. The higher the concentration, the less fuel needs to be supplemented. However, the high calorific value of the exhaust gas itself is also a test for the equipment load.

The most suitable for high-concentration exhaust gas is actually the recycling route. The higher the concentration, the better the efficiency of condensation recovery and the more solvent is recovered. A set of compression condensation membrane separation equipment, waste gas into, solvent back, discharge standards. The higher the concentration, the greater the recovery and the shorter the return on investment period.

Taking dichloromethane as an example, compared with 5000 mg per cubic meter and 2000 mg per cubic meter, the amount of solvent recovered per cubic meter of waste gas in the former is more than twice that of the latter. The equipment is similar, but the recovery revenue has doubled. High concentration is not a burden, it is an advantage.

So the exhaust gas concentration is high, don't worry. Do the test first to see if the solvent inside is worth nothing. If it is valuable, the higher the concentration, the more cost-effective it is. Luoyang Wo Hong focuses on the compression and condensation membrane separation process, which can be matched according to your exhaust gas parameters. Before selection, free working condition detection can be arranged and data can be used to speak.