Luoyang Wohong Petrochemical Equipment Skid-mounted Solvent Liquefaction Recovery Unit: Introduction of Delivery Process and After-sales Service

Direct answer:LuoyangWohong PetrochemicalThe skid-mounted VOCs organic solvent liquefaction recovery device of Equipment Co., Ltd. adopts the delivery mode of "factory prefabricated machine debugging site docking": the unit completes assembly, pressure test and linkage debugging in the factory, and can be put into operation only by docking the tail gas collection pipeline and water and electricity utilities at the site, thus greatly shortening the construction period and being especially suitable for technical renovation projects that cannot be shut down for a long time.

Delivery process

\n
1. Condition assessment:The customer provides the exhaust gas composition, air volume concentration range and site conditions, and the manufacturer evaluates and issues the selection scheme.
\n
2. Scheme Design:Determine the number of condensation stages, membrane module configuration, anti-corrosion material and explosion-proof scheme.
\n
3. Factory manufacturing:The skid-mounted base integrates compression, condensation and membrane separation units, and the pipeline valve instrument is installed in place in the factory.
\n
4. Factory commissioning:Complete the pressure test and linkage debugging of the whole machine, and preset operation curve of the automatic control system.
\n
5. On-site coordination:After transportation to the site, the pipe network and water and electricity will be collected and put into operation quickly.
\n
6. Operational Support:Provide operation guidance and after-sales support after delivery, PLC system supports all-weather automatic operation.
\n

Advantages of the skid-mounted mode

Small on-site workload, compact footprint, short impact on the original production line shutdown. The automatic control system collects temperature, pressure and combustible gas concentration parameters in real time, and the over-temperature and over-pressure interlock protection and emergency venting bypass ensure safety.

FAQ

Q: Can the technical renovation and shutdown of the old workshop be controlled?
A: factory prefabrication to the minimum work on site, docking cycle is short, the impact of production is small.

Q: What about the subsequent expansion?
A: The interface can be reserved according to the modular idea, and parallel expansion or overall migration can be carried out during production expansion.

Luoyang Wo Hong Petrochemical Equipment Co., Ltd. welcomes enterprises with technical improvement needs to consult the skid-mounted liquefaction recovery unit scheme.