Reference for the floor space of VOC exhaust gas treatment equipment | Equipment dimensions corresponding to different treatment airflows

    VOCWaste gas treatment equipmentReference for floor area | Equipment size corresponding to different processing air volumes

Enterprises are planning VOCwaste gas treatmentWhen it comes to equipment, site space is an important limiting factor. The equipment with different processes and processing air volumes has significant differences in floor area. The following is a rough size reference for your site planning in the early stages of the project.

    activated charcoalThe adsorption equipment has a relatively small footprint. Equipment with a processing capacity of less than 5000 cubic meters per hour, with a box size of approximately 2 meters long, 1 meter wide, and 1.5 meters high, occupying an area of approximately 2 square meters. A device with an air volume of 10000 cubic meters per hour, measuring approximately 3 meters in length, 1.5 meters in width, and 2 meters in height, occupying an area of approximately 4.5 square meters. A device with an air volume of 20000 cubic meters per hour, measuring approximately 4 meters in length, 2 meters in width, 2 meters in height, and 2.5 meters in height, occupying an area of approximately 8 square meters. The structure of activated carbon equipment is simple and can be arranged in multiple layers or parallel, but the space for carbon replacement operation needs to be considered.

The footprint of catalytic combustion equipment is moderate. The equipment capable of processing an air volume of 5000 cubic meters per hour has a main unit size of approximately 3 meters in length, 1.5 meters in width, and 2.2 meters in height, occupying an area of approximately 4.5 square meters. In addition, the pipeline and maintenance space require approximately 8 to 10 square meters. The equipment with an air volume of 10000 cubic meters per hour has a main unit size of approximately 4 meters in length, 2 meters in width, and 2.5 meters in height, covering an area of approximately 8 square meters, and requires approximately 15 square meters of surrounding space. The equipment with an air volume of 20000 cubic meters per hour has a main unit size of approximately 5 meters in length, 2 meters in width, 2.5 meters in height, and 3 meters in height, occupying an area of approximately 12.5 square meters, and requiring around 20 to 25 square meters of surrounding space.

The thermal storage oxidation equipment occupies a large area. Equipment capable of processing air volume of 10000 cubic meters per hour, two bed typeRTOThe host size is about five meters long, two meters wide, and three and a half meters high, covering an area of about ten square meters. Adding chimney pipes and maintenance space, it takes about thirty to forty square meters. The equipment with an air volume of 20000 cubic meters per hour has a main unit size of about 7 meters long, 3 meters wide, and 4 meters high, covering an area of about 20 square meters, and requires about 50 to 60 square meters of surrounding space. The three bed or rotating RTO structure is more compact, but higher in height.

The footprint of membrane condensation recovery equipment is between activated carbon and RTO. A lever mounted equipment with a processing capacity of 5000 cubic meters per hour, measuring approximately 3 meters in length, 1.5 meters in width, and 2.2 meters in height, occupies an area of approximately 4.5 square meters, and requires maintenance space of approximately 8 to 10 square meters. A device with an air volume of 10000 cubic meters per hour, measuring approximately 4 meters in length, 2 meters in width, and 2.5 meters in height, occupies an area of approximately 8 square meters, and requires approximately 15 square meters of surrounding space. The equipment with an air volume of 20000 cubic meters per hour can be arranged separately, with the condensing unit and membrane separation unit installed separately, occupying a total area of about 20 to 30 square meters. The equipment adopts a lever mounted design, which reduces the on-site installation workload.

The above dimensions are reference values, and actual dimensions may vary due to differences in equipment design, material, and configuration. LuoyangWohong PetrochemicalEquipment Co., Ltd. can provide customized layout solutions based on your site conditions to achieve optimal layout within a limited space.