The operation coordination of membrane separation oil and gas recovery device: how to stabilize the inlet concentration in the absorption section, how the membrane separation section works by pressure difference, how to connect the condensate in the condensation section, and the parameters to be monitored during daily inspections.
2026-10-27Daily observation points for membrane component maintenance: determination of the trend of vacuum degree and flow rate on the permeation side, pressure changes on the interception side, and pressure difference before and after the membrane, and incorporating membrane life management into daily inspections.
2026-10-27The condensed liquid recovered from condensation is sent from the recovery point to the reuse or disposal point, and the storage and transportation links in between determine the loss and quality. This article explains the configuration requirements, quality storage division, transportation method selection, and key points of ledger measurement for condensate tanks, providing reference for design and management.
2026-10-23The graded condensation uses a circulating water section to deal with high boiling point components and a chilled water section to deal with low boiling point components, balancing recovery rate and power consumption. This article explains the segmentation logic and temperature setting.
2026-10-22The energy consumption of the solvent recovery system is mainly from the refrigeration unit, followed by the vacuum pump. This article breaks down the energy consumption structure and provides feasible ways to reduce consumption.
2026-10-22The condenser area is configured with a margin of 1.2 to 1.5 times the amount of desorbed steam, and the acceptance check is to see if the exhaust gas temperature reaches the design value. This article explains the configuration logic.
2026-10-22Frost formation in the condensation system is often caused by water in the intake or low temperature settings. First, check for drying and pre-treatment before clearing the frost. This article explains the disposal sequence and key points for winter antifreeze.
2026-10-22Vapor pressure and boiling point are two core indicators for determining the volatility of solvents, directly determining the distribution of emissions and the difficulty of condensation recovery. This article explains the relationship between the two, their impact on collection and condensation configuration, and the order of verification when selecting, for the reference of process personnel.
2026-10-21Recycled condensate often contains moisture, and direct reuse can affect product quality. This article compares the applicable conditions and costs of three methods: layered static standing, adsorption drying, and distillation dehydration, providing reference for enterprises when choosing dehydration schemes.
2026-10-20Mr. Li 13526990215
Hotline
