Is it difficult to recover oil and gas from chemical storage tank areas? One stop solution for Luoyang Wohong pry installation device

Is it difficult to recover oil and gas from chemical storage tank areas? One stop solution for Luoyang Wohong pry installation device

The difficulty of oil and gas recovery in chemical storage tank areas lies in intermittent emission of waste gas, large concentration fluctuations, and high explosion-proof requirements. The breathing valve of the storage tank will release gases containing organic matter during feeding, discharging, or temperature changes. Traditional processing methods either have slow device response and high energy consumption, or frequent maintenance and high operating costs.

LuoyangWohong PetrochemicalThe pry mounted oil and gas recovery device of Equipment Co., Ltd. adopts a combination process of compression condensation and membrane separation, and has been designed specifically for the working conditions of the storage tank area. After being pressurized by the compressor, the exhaust gas enters the condensing unit, and some organic matter is directly liquefied and recovered; The uncondensed exhaust enters the membrane module, and organic matter preferentially passes through to form a concentrated gas, which is sent back to the front end of the system for circulation and treatment, and the air is discharged in compliance with standards. The entire system operates in a closed circuit, and the emission concentration meets current environmental protection requirements.

The device adopts a modular design, with the compressor, condenser, membrane components, and control system integrated on a steel base, which is assembled and debugged before leaving the factory. On site operation only requires connecting the power supply and breathing valve pipeline, with a short installation cycle. The equipment has a small footprint and can be placed outdoors, suitable for the site conditions of the storage tank area. Due to the modular design, the processing capacity can be flexibly increased according to the expansion of the tank area in the later stage.

The equipment is powered by electricity, with no combustion process or open flames, making it suitable for use in explosion-proof areas. Not runningactivated charcoalWaiting for consumables to be replaced does not generate hazardous waste. The control system automatically starts and stops based on the exhaust situation of the breathing valve, working when there is gas and waiting when there is no gas, avoiding energy waste caused by continuous operation. Daily maintenance mainly involves checking the pressure difference on both sides of the membrane module and cleaning the surface of the heat exchanger.

For the oil and gas recovery project in the chemical storage tank area, the Luoyang Wohong pry installation device can achieve material recovery while meeting emission requirements, making it suitable for renovation projects that require rapid start-up or compact sites. Before selecting, it is recommended to complete the waste gas detection in the storage tank area, clarify the types of materials, the number of breathing valves, and the emission rules, and match the corresponding equipment specifications.