Is there a more convenient maintenance method for VOCs waste gas treatment?

For most non-environmental professional enterprises, VOCsWaste gas treatment equipmentThe daily maintenance is a headache.activated charcoalThe catalyst should be replaced regularly, the catalyst should be prevented from poisoning, the burner should be overhauled, and the spray tower should be scaled. Is there a more worry-free way of maintenance?

The so-called worry, essentially means that the equipment has a high degree of automation, fewer consumables, a low failure rate, and does not require frequent manual intervention. From this standard point of view, simple adsorption or combustion equipment are difficult to achieve complete peace of mind. Activated carbon needs to be replaced frequently, and waste carbon is hazardous waste;RTOThe thermal storage ceramic needs to be cleaned regularly and the switching valve needs to be overhauled; the RCO needs to monitor the catalyst activity. These maintenance work not only take up manpower, but also professional, enterprises often have to entrust a third party operation and maintenance.

The condensation plus membrane separation process has obvious advantages in terms of maintenance convenience. The whole system consists of refrigeration unit, membrane module, heat exchanger and circulating pump. There is no high temperature component, no consumable adsorbent or catalyst. The daily maintenance work is mainly to check the refrigerant pressure and oil level of the refrigeration system regularly, and to observe the change of the pressure difference before and after the membrane module. The service life of the membrane module is usually 3 to 5 years, during which it does not need to be replaced. The condenser can be defrosted or cleaned regularly. Since the whole process is a closed cycle, no waste activated carbon or waste catalyst is produced, and the trouble of hazardous waste disposal is also saved. LuoyangWohong PetrochemicalThe condensation and film method system designed by Equipment Co., Ltd. adopts full-automatic PLC control. The equipment can operate unattended and only alarm through the mobile phone terminal or the central control room in case of abnormality.

For enterprises that want to reduce the investment in operation and maintenance, choosing a recycling process with condensation and membrane method as the core is undoubtedly much more worry-free than the destruction process. Put your energy back on the main production, instead of worrying about waste gas equipment every day, this is an important reason why many companies choose this technology.